Copper Nickel tubes, 10% – C70600 – exhibits excellent resistance to impingement attack. It is also highly resistant to SCC. This alloy is suitable for Marine condenser tube installations in place of Aluminum Brass, especially where higher water velocities are encountered.

 

UNS No.	C70600 – BSI No. CN102 – ISO Name CuNi10Fe1Mn
Chemical Comp. (%)	Cu rem / Ni 9 ~ 11 / Pb 0.05 / Fe 1 ~ 1.8 / Zn 1 max / Mg 1 max
ASTM Spec.	B 111, B 395, B 466, B 552
ASME Spec.	SB 111, SB 395, SB 466
Applications	Condenser, Evaporator and Heat Exchanger tubes; Distiller tubing; Salt Water piping.
Temper	O61 Annealed / H55 Light-Drawn

 

Properties *	Metric	English
Density	8.94 g/cc	0.323 lb/in³
Tensile Strength min.- O61 -/- H55	275 MPa -/- 310 MPa	40 ksi -/- 45 ksi
Yield Strength min.- O61 -/- H55	105 MPa -/- 240 MPa	15 ksi -/- 35 ksi
CTE, linear	17.1 10-6/°C @ 20.0 – 300 °C	9.5 10-6/°F @ 70.0 – 570 °F
Specific Heat Capacity	0.09 cal/g-°C @ 20ºC	0.09 BTU/lb-°F @ 70ºF
Thermal Conductivity	45 W/m-K @ 20.0 °C	26 BTU/ft2/ft/h/°F @ 70.0 °F
Melting Point	1099 – 1149 °C	2010 – 2100 °F